The JETS VRLA battery uses an absorbed electrolyte system. All of the electrolyte is absorbed into the positive plates, negative plates, and the separators. Coupled with the use of special epoxies, and long sealing paths for posts, JETS VRLA batteries have exceptional leak resistance, and can be used in any position.
JETS batteries have exceptional deep discharge recovery and charge acceptance, even after deep or prolonged discharge.
There is no corrosive gas generation during normal use and no need to check the specific gravity of the electrolyte or to add water during the service life.
Because of the use of lead calcium grids alloy and highly pure material. JetPOWER VRLA battery can be stored for long periods of time without recharge. The rate of JETS VRLA battery self-disc harge on open circuit is less than 2% per month at 200 C /680F.
The JETS VRLA battery has stable and reliable capacity. The battery can withstand overcharge, over discharge, vibration, and shock. To assure this high Quality and reliability, the batteries are 100% tested on production line for voltage, capacity, seals and the safety valve are 100% visually inspected before the final assembly process.
The JETS VRLA battery has long life in standby or cyclic service.
Ensures highest current carrying capability.
The initial capacity will be 100% and optimize cell voltage balance, due to the tank formation of the plates.
Ensures quality products through control of processes and standards.
For any quieries, suggestions or product information feel free to contact with us
F-110, 1st Floor, DDA Building,
No. 5, Opp. Satyam Cineplex,
Distt. Centre, Janak Puri,
New Delhi-110058 (INDIA)
Our presence :- Ambala & Rohtak
Mr. Dheeraj +91-8287175272 email@example.com