An isolation transformer is a transformer used to transfer electrical power from a source of alternating current (AC) power to some equipment or device while isolating the powered device from the power source, usually for safety. Isolation transformers provide galvanic isolation and are used to protect against electric shock, to suppress electrical noise in sensitive devices, or to transfer power between two circuits which must not be connected together.
Suitably designed isolation transformers block interference caused by ground loops. Isolation transformers with electrostatic shields are used for power supplies for sensitive equipment such as computers or laboratory instruments.Isolation Transformers.
Strictly speaking any true transformer, whether used to transfer signals or power, is isolating, as the primary and secondary are not connected by conductors but only by induction.
However, only transformers whose primary purpose is to isolate circuits (opposed to the more common transformer function of voltage conversion), are routinely described as isolation transformers.
Given this function, a transformer sold for isolation is often built with special insulation between primary and secondary, and is tested, specified, and marked to withstand a high voltage between windings, typically in the 1000 to 4000 volt range.
For any quieries, suggestions or product information feel free to contact with us
F-110, 1st Floor, DDA Building,
No. 5, Opp. Satyam Cineplex,
Distt. Centre, Janak Puri,
New Delhi-110058 (INDIA)
Our presence :- Ambala & Rohtak
Mr. Dheeraj +91-8287175272 firstname.lastname@example.org